Monday, October 18, 2010

Chitin–Silica Nanocomposites by Self-Assembly




This trick allows us to mold and sinter silicon with a designed nano porosity.  The porosity can be even ordered to a fair degree giving us two separate products as a good starter.  By spraying it on sheets, it should also be possible to make highly open geometries.  All this makes me want to build super batteries.


The real payoff may be in the prosaic world of gas storage.  Assuming charging capacity is possible, then it should be possible to saturate the porosity at low pressure and to easily retain the gas until a charge reversal is used to chase it all out.  That is assuming that the pores are really small enough to capture the gas involved.

Anyway, this will surely spin serious applications.  Use you imagination.


Chitin–Silica Nanocomposites by Self-Assembly
OCTOBER 12, 2010
A new family of chitin–silica nanocomposites has been synthesized by using a versatile colloid-based combination of self-assembly and sol–gel chemistry. Various textures and morphologies can be obtained by adjusting the evaporation-based processes or by applying external fields. After calcination, textures and birefringence are preserved in the resulting mesoporous silicas.


Nanocomposites can also serve as “molds” for the production of porous substances. These have potential application in the areas of gas storage, catalysis, or materials separation.


For their synthesis, the researchers chose to use a sol–gel process, a popular technique for the production of inorganic network structures. In the first step they needed to generate a sol: a suspension of finely divided nanoscopic particles in a solvent. Their challenge was to obtain co-suspension of the two different components, silicon dioxide precursors (siloxane oligomers) and chitin nanorods from shrimp shells (a renewable resource). However, these two components require different conditions to remain in stable suspensions without uncontrolled precipitation. The researchers produced an alcohol suspension by slowly replacing water with ethanol. Through slow removal of the solvent, a gel formed. Gels are gelatinous substances; they contain solid but loose, cross-linked, three-dimensional polymer structures.


The sol can be “poured” into a desired mold and dried or it can be spray-dried into spherical particles. This process results in a nanocomposite made of chitin rods that are fully embedded in a silicon dioxide matrix. The mechanism by which this occurs is based on a self-organized aggregation of the chitin molecules and weak attractive forces between chitin and siloxane oligomers.


The stability of the alcohol suspensions opens up a wide range of possibilities for the production of materials with controllable volume ratios, spatial arrangements, and morphologies. If a magnetic field is applied during preparation of the material, the chitin rods line up in parallel. If the nanocomposite is heated, the chitin rods can be burned off to
leave behind cavities. This forms a highly porous material with interesting properties. 

No comments:

There was an error in this gadget